So I have a 2009 CVPI that I finally upgraded the plenum and throttle body on. Now it went mostly well, but in my attempt to make the vacuum lines work without replacing any tubing, I broke a piece. My issues are that I dont know exactly where it was supposed to go and that I dont know what the piece is called. I dont know how to attach a picture without a link, so I'll have to describe it. There is a piece of vacuum line that comes off of the back of the plenum and goes towards the drivers side that tees off. The part I broke is where the tee itself connects to something else. I know this is a pretty poor description, but its the best i can presently do. I'm hoping someone has more of a clue than I do so any help is appreciated. Thanks