Ok, my headlights were waaaay off. I went in and adjust them up, and the other down.
1) is there a way to adjust them side 2 side?
2) How do you remove them. I need to drill some lower holes in them to keep moisture out the PS headlight. Did it on my old Vic and it worked perfect.
_________________________
*2010 Black P7B/ 86K miles/ 3.55 gears
*1989 Mustang GT 5.0 convertible/ 84K original miles/ 1 female owner before my purchase/ no winters/ restored
gDMJoe Poobah
Registered: 06/03/03
Posts: 7708
Loc: Timbuk3, MI
Quote: cop4christ ...Its a 2003 P73 Vic.
To remove ... There are two slide spades (for lack of a better term) for each headlight on the backside of the radiator support (they slide over the adjusters); slide/pry them up and the headlight will release.
To adjust side-to-side ... Turn the adjuster closest to the grille, in or out depending on which way you're trying to adjust them.
Copyright 2000-2015 by Crownvic.net and Steve Spaulding. All Rights Reserved.
The photographs, graphics and data contained in this Web site are the properties of the contributors, or Crownvic.net and may not be used without expressed written consent. Crownvic.net is not affiliated with the Ford motor company.
Previous Topic
Index
